Close image Close

Previous image Image Next image

Tap here to open image in new tab

Kahikatea Flat Road, Silverdale
Nth Auckland, New Zealand

Phone (09) 420 5485
Fax (09) 420 5489

Sawn Treated Tanalized Radiata Pine Timber

2016/2017 Holiday Notice

Cypress Sawmill is closed from 1PM Thursday 22nd December to Sunday 8th January 2017
Normal operating hours resume Monday 9th January

Cypress Sawmill stocks a range of tanalized pressure treated pine, in most common timber sizes. We have:

Treated Pine

H4 Ground Contact treated timber that is suitable for use as fence posts, retaining walls, garden edging etc. 100x100, 100x75, 150x50, 200x50, 100x25.

150x50 H4 retaining is available in a rustic type no 3 grade or a better no 2 grade, both are suitable for retaining walls depending on the effect required. Lengths are available up to 6.0 metre and have a sawn finish. Timber can be dfs (dressed on all four sides) on request.

We also have H3 treated timber for use above the ground. It is suitable for use inside or outside and is available in all the common timber sizes.

Untreated Pine

Cypress Sawmill can supply untreated pine timber and will cut to order to your requirements. Timber can also be cut to length through our optimizing docking saw ensuring the most usable end product.


Timber is sold by the linear metre. We sell any quantity from one piece to packet loads. Come and select your own or contact us and we can deliver it to you.

Photos of Treated Pine Timber

  • H3 Treated Pine

    H3 Treated Pine

  • 200x50 Pine Timber

    200x50 Pine Timber

  • 300x25 H3 Timber

    300x25 H3 Timber